Screwpop 4-in-1 Keychain Tool is a handy little tool that helps you crank out the work during the day and, after hours, pop a cap on cold. With a removable #2 Philips Head and flat head bits, a 1/4" hex drive and a bottle opener, this would have definitely been something MacGyver could have pulled from his pocket.

The tool is small, simple and well quite frankly smart. With the rounded bottle opener end, you can get quite a bit of leverage to loosen or tighten screws. Take out the bit and you can then drive 1/4" hex head screws or, if you need too, you can even insert other bit types for other sizes and types of screws. Of course our favorite part is the bottle opener. Let’s face it, there is not much better than ogling over a job well done except with an ice cold beverage in your hand. Nowadays, there are not that many brands of pop top soda bottles so we will have to assume that you will use the bottle cap opener after you are done working! 

We tried to think of who would like or use this tool and it is pretty much for everyone that does anything that is remotely handy. Painters can use it to open paint cans and take off outlet and switch cover plates; handy men can use it to do on the fly repairs and carpenters can use it to install cabinet knobs and tighten hinges. We handed out a handful of these to some of our contractor buddies and all of them think it is great.

Conclusion

Screwpop 4-in-1 Keychain Tool is a handy compact tool that serves a few different purposes. Use it during the day for work to tighten and loosen screws and use it after work to pop the caps on some cold bottle of brew. For our performance rating we gave the tool a 7/10 since it does a pretty good job of doing small tasks. For our Value rating we gave the tool a 5/10 since it cost almost as much as some 8-in-1 full size screwdrivers at a discount store.

About Screwpop:
Screwpop Tool, LLC. Markets and manufactures the Screwpop 4-in1 keychain tool. They are located in Lee’s Summit, Mo.