With a profile and design that looks more like a battery powered drill, the new BernzOmatic BZ9400QFK Quickfire Hand Torch is trigger operated, super compact and packs in a 3600 deg F. flame. With the gradual phase out of MAPP gas fuel for hand torches; this torch is designed to use the new Max Power Propylene fuel which operates at about the same temperatures.
TWI International is a Taiwan-based company that produces lots of forged products, some of which end up at places like Lowe's. TWI's Flaring Tool Set is a solid, durable product that will easily flare copper piping. The tool's folding bar is made with heat treated alloy steel and it has a drop forged carbon steel yoke and wing nuts. The tool can be used to flare 3/16", 1/4", 5/16", 3/8", 7/16", and 5/8" OD copper tubing. We used it for a gas line and it was the perfect solution. At just over $10 at our local home improvement warehouse it was something we decided to try out and it really paid off in it's performance.
The PermaFLOW Never Clog Drain is a unique device that prevents clogs by allowing the homeowner to twist a dial to move the clog through the pipes. It's designed to help easily remove the drain buildup before it becomes a problem and removes the need for plungers, drain cleaners, and of course disassembly of the drain. The shape of the PermaFLOW Self Cleaning Drain is designed to increases turbulence which helps reduce the continuous and typical buildup of dirt and debris, preventing blocked drains.
The Lenox 21011 TC138 Tubing Cutters will handily cut pipe diameters from 1/8" to 1-3/8". We found that the four rollers keep the tubes from threading. The cutters have a "full-stop" feed system that brings up the tool short before the wheels and rollers contact each other. It only takes a screwdriver to change the wheels and extra cutting wheels can be stored in the handle. You can also cleanly and easily de-burr pipes with the replaceable machinist's reamer.
The new Ridgid 65S Quick-Acting Tubing Cutter has been designed for optimized performance on stainless steel tube. This new tubing cutter is based on Ridgid’s already successful line of cutters that cover a wide variety of pipe, tube types and sizes. To make cuts faster there is a Quick-acting mechanism that rapidly adjusts to different sized tubing.
The new Ridgid Model 65S Stainless Steel Quick-Acting tubing cutter is designed to make quicker cuts to stainless steel and other metallic tubes such as steel, zinc, copper and aluminum. The tubing cutter features something Ridgid dubs the "X-CEL" knob - a larger, ergonomic knob which gives the user a more firm grip allowing more force to be applied when cutting through tubing. It makes the process faster and easier. The 65S comes with a spare wheel that is stored in the knob and the X-CEL's wheel pin allows for rapid, tool-less wheel changes.
RIDGID shows off how less is more with their new press tool. The RP 210-B is more than 2 inchs shorter and 25% lighter then the previous compact press tool. This model comes with an incredibly long service interval of 30,000 cycles and an improved 270 degree swiveling jaw and barrel. Merge these features with the dependability of 18V Lithium-Ion batteries and you have a winning combination.
We met with a representative of Flair-It Plus who demonstrated to us a new tool for joining PEX tubing to an all-new range of plastic fittings. The tool is going to be priced at under $50 and will be available later this year. What's exciting is that it eliminates all brass fittings and seems perfect for markets such as California, Nevada and other states which have extremely corrosive water and eat brass fittings quickly.
See All Articles In This Section
