Senco Specialty Fasteners Expanding

Senco Specialty Fasteners

Senco Specialty Fasteners Include New Stainless Steel and Aluminum Solutions

Senco is adding stainless steel and aluminum nails to their fastening lineup. Senco saw the need for stainless steel for applications where plain steel fasteners are receptive to rust and corrosion over time, especially when exposed to moisture. The latest Senco specialty fasteners will include a wider offering of 304 stainless steel, new 316 stainless steel, and new aluminum nails in 4 collations – zero degree plastic coil, 15 degree plastic coil, 15 degree wire weld coil, and 20 degree plastic strips.


Normally, a stainless steel contains 10.5% of chromium. It is the presence of chromium that keeps the steel alloy from readily corroding, rusting, or staining with water. However, they not fully stain-free in low-oxygen, high-salinity, or poor air circulation environments. The new Senco stainless steel nails contain more than the normal amount chromium to improve corrosion resistance better than normal blends.

The Senco 304 stainless steel fasteners have better acid and rust resistance. They contain 18% chromium and 8% nickel, among other elements. With these chemical properties, 304 stainless steel nails are an excellent choice for all types of environments and woods including exotic woods, cedar, or redwood. They are recommended if you are more than 5 miles from a body of water and are in a wet environment.

Senco 316 stainless steel fasteners have the best corrosion resistance qualities. These nails are Senco’s best bet for highly corrosive coastal environments and work well in all types of woods. They contains 16% chromium, 10% nickel, and 2% molybdenum. The addition of molybdenum and a higher nickel content increases the corrosion resistance properties. These are your go-to solution if you’re within 5 miles of a body of water, including ocean coastlines.

Senco is also introducing aluminum nails. Aluminum fasteners are ideal for soft woods, particularly cedar and redwood. The aluminum chemical properties help eliminate staining, bleeding, or streaking that can occur when using galvanized or plain steel fasteners.

Senco Specialty Fasteners Expansion

0° Plastic Coil Nails

Aluminum Finish, Diamond Point,  Full Round HeadSenco Specialty Fasteners - Senco 0° Plastic Coil Nails

  • Senco FL20AMEB .099″ x 1-7/8″
  • Senco FF17AMEB .099″ x 1-1/2″
  • Senco FF19AMEB .099″ x 1-3/4″
  • Senco FF20AMEB .099″ x 1-7/8″

304 Stainless Steel Finish, Diamond Point,  Full Round Head

  • Senco EL20AGEB .092″ x 1-7/8″
  • Senco EL23AGEB .092″ x 2-1/4″

15° Plastic Coil Nails

Aluminum Finish, Diamond Point,  Full Round Head

  • Senco FF17AMEC .099″ x 1-1/2″
  • Senco FF19AMEC .099″ x 1-3/4″
  • Senco FF20AMEC .099″ x 1-7/8″

304 Stainless Steel Finish, Diamond Point,  Full Round Head

  • Senco EL23AGEC .090″ x 2-1/4″

15° Angled Wire CoilSenco Specialty Fasteners - Senco 15° Angled Wire Coil

304 Stainless Steel Finish, Diamond Point,  Full Round Head

  • Senco EL15AGEH .090″ x 1-1/4″
  • Senco EL17AGEH .090″ x 1-1/2″
  • Senco EL19AGBH 0.092″ x 1-3/4″ with Sencote coating
  • Senco EL20AGBH 0.092″ x 1-7/8″ with Sencote coating
  • Senco EL23AGBH  0.092″ x 2-1/4″ with Sencote coating
  • Senco EL25AGEH .090″ x 2-1/2″
  • Senco GL24AGBF 0.113″ x 2-3/8″
  • Senco HL19AGEH .120″ x .120″
  • Senco HL27AGBF 0.12″ x 3″

316 Stainless Steel Finish, Diamond Point,  Full Round Head

  • Senco EL25AUEH .092″ x 2-1/2″

20° Angled Strip Plastic Collated Nails

304 Stainless Steel Finish, Diamond Point,  Full Round Head

  • Senco GL24AGBS 0.113″ x  2-3/8″
  • Senco HL27AGBS 0.12″ x 3″

The 22 new nails are useful in a variety of applications such as siding, fencing, decks, docks, and general exterior construction.

Buy all Senco fasteners from our friends at Acme Tools!

Related articles