4-in-1 Keychain Tool is a handy little tool that helps you crank out the work
during the day and, after hours, pop a cap on cold. With a removable #2 Philips Head and flat head bits, a
1/4″ hex drive and a bottle opener, this would have definitely been
something MacGyver could have pulled from his pocket.
The tool is small, simple and well quite frankly
smart. With the rounded bottle opener end, you can get quite a bit of leverage
to loosen or tighten screws. Take out the bit and you can then drive 1/4″
hex head screws or, if you need too, you can even insert other bit types for
other sizes and types of screws. Of course our favorite part is the bottle
opener. Let’s face it, there is not much better than ogling over a job well
done except with an ice cold beverage in your hand. Nowadays, there
are not that many brands of pop top soda bottles so we will have to assume that
you will use the bottle cap opener after you are done working!
We tried to think of who would like or use this tool
and it is pretty much for everyone that does anything that is remotely handy.
Painters can use it to open paint cans and take off outlet and switch cover
plates; handy men can use it to do on the fly repairs and carpenters can use it
to install cabinet knobs and tighten hinges. We handed out a handful of these
to some of our contractor buddies and all of them think it is great.
4-in-1 Keychain Tool is a handy compact tool that serves a few different
purposes. Use it during the day for work to tighten and loosen screws and use
it after work to pop the caps on some cold bottle of brew. For our performance
rating we gave the tool a 7/10 since it does a pretty good job of doing small
tasks. For our Value rating we gave the tool a 5/10 since it cost almost as
much as some 8-in-1 full size screwdrivers at a discount store.
Tool, LLC. Markets and manufactures the Screwpop 4-in1 keychain tool. They are
located in Lee’s Summit, Mo.