If you think a dust extraction system is all you need for a clean shop, you’re missing an important component. Delta Power Equipment Corp. introduced its new 3-Speed Ambient Air Cleaner, Model 50-871, at the 2012 IWF. The Delta 50-871 3-Speed Ambient Air Cleaner is designed to achieve the highest airflow for an air cleaner in its class, operating at three speeds (540, 730, and 1200 CFM).
Delta 3-Speed Ambient Air Cleaner Features
The design is such that an inner filter captures all particles larger than 1 Micron. A digital readout displays the status and alerts the user when the filter needs to be changed, ensuring the Air Cleaner runs at its optimal peak potential.
When set to 1200 CFM, its maximum cleaning mode, the 50-871 Air Cleaner recirculates all the air in a 20′ x 20′ x 8′ room approximately 22 times per hour. It includes a remote control, allowing you to turn the unit on and off, as well as adjust the speed and timer, when the unit is mounted on the ceiling or located in an otherwise unreachable area. The aforementioned timer can be configured to run for 1/2 hour to 15 hours, depending upon the amount of Air Cleaning you want accomplished. After the timer runs its course, it turns itself off. This would be a great addition to your shop, alongside your Delta Unisaw table saw.
The unit features a 1/5 HP single-phase motor and includes 4 eye bolts and flange nuts for ceiling suspension. It also includes four rubber feet, a 6-foot power cord, one outer pleated filter, one inner filter, and a remote control (two AAA batteries not included, oddly enough). Available accessories include a two-pack of pleated filters, the inner filter, and an electrostatic filter.
For more information, customers can visit DeltaMachinery.com.
