fbpx
October 23, 2021

Professional Tool Reviews for Pros


LED vs Halogen Work Lights and Bulbs on Jobsites

LED vs Halogen Work Lights

We’ve traditionally used a lot of bulb-based lighting on our jobsites. While LED started making some headway in the past several years, only a few companies are bringing LED technology to larger construction area lights and even temporary lighting. These new lights cover anything from illuminating specific areas to flooding large jobsites with up to 120,000 lumens or more. Often, these larger site lights require significant amounts of power or even generators to run. Needless to say, many factors come into play when considering LED vs halogen work lights.


Running halogen or similar bulb technology can be extremely costly. First, you have to pay for fuel or electricity to power the lights. Secondly, you need to factor in maintenance and bulb replacement. Over time, this saps productivity and profitability.

It also slows you down since halogens cannot be moved or packed up until they cool.

LED vs Halogen Work Lights for Jobsites

Using LED work lights on your jobsite solves a myriad of problems. LED lights typically operate at up to 90% energy efficiency compared to halogen bulbs. That means more light and less heat. That’s great for your pocketbook and efficiency, but it also helps the environment at the same time.

Not all LED jobsite lights are the same. Many work fine for interior work or smaller jobs that don’t require larger amounts of output. For large area jobsite lighting, however, only a few companies provide solutions that can tackle rain, snow, heat, and other extreme conditions.

Lind Equipment Beacon LED Tower Light

Another consideration is ruggedness. An LED lighting solution that installs easily might make for a great addition to your arsenal. If it breaks at the first bump or tip, however, that doesn’t gain you any productivity. LED work lights must be able to take falls and bumps or have a design that doesn’t lend itself to being knocked over.

In short, it HAS to be durable.

Temporary Lighting is Moving to LED

When you want to provide lighting for an entire work area, having the ability to daisy chain LED lights together is key. Portability also saves you money, so be sure to find a solution that can move from jobsite to jobsite. You want to be able to reconfigure your lighting without having to make multiple runs with 100-foot extension cords to the power drop.

We prefer lights that have a male “daisy-chaining” outlet for power. This lets you use standard extension cords to link up the LED lighting and fill the entire job site. This really comes into play with temporary lighting, but you also find this feature on some area lights.

daisy chaining LED lights
Beacon360 Spark Modular String light

Are LED Work Lights as Bright as Halogen for Jobsites?

When switching to LED work lights, people often wonder if LED work lights are bright enough for jobsites. The answer is a resounding “Yes”. In fact, companies like Lind Equipment make LED lights that put out more than 120,000 lumens and can operate for up to 45 hours on just 6-gallons of fuel (with the right generator). For another example, the 14,300-lumen brightness of a Beacon 360 blaze hanging light equals the usable light of a 400W metal halide but only consumes 100 watts of power.


Halogen vs LED Bulbs

When considering halogen vs LED bulbs, many different things come into play. For one, halogen bulbs generate way more heat than LED bulbs. While LED bulbs don’t convert 100% of the supplied energy into light, they do a much better job than halogen or filament-based products. Take a look at this general comparison grid for the two technologies:

Halogen BulbLED Bulb
Typical hours of life< 3,00030,000+
Heat lossHigh (80%+)Low (10-20%)
Power consumptionHighLow
Cost per fixtureMediumHigh
DurabilityLowHigh
DimmableYesMaybe
Color Temp2700K2700-10,000K

What About Quality?

Lots of companies make LED lights—so how do you choose? For large purchases, we recommend sticking with companies that really know lighting. Some companies, like Lind Equipment, have been making jobsite and work area lighting for decades. Chinese knock-offs and Johnny-come-lately’s may be fine for headlamps and flashlights. Stay away from those companies when making larger purchases.

When you really want to make the switch to LED for daily jobsite lighting, established companies understand the needs of tradesmen and business owners. You want a company with a serviceable product, a good warranty, and which stands by its products.

Do LED Work Lights Cost More?

Making the switch to LED can carry significant up-front costs. The downstream savings in efficiency, maintenance-reduction, and power consumption, however, can quickly make up the difference. Whether you’re a developer or a general contractor, you can literally save hundreds of thousands of dollars between electricity and labor costs. For the tradesman, you can reduce labor time—particularly for temp lighting installation and removal.

Have You Decided Yet?

Whether you find this an easy decision or one requiring some additional math—eventually, LED lighting will be the norm. Those getting in early are laying the groundwork to save money now while others work the status quo. Increasing your competitiveness while lowering labor costs (not to mention electrical costs to your clients) is a great way to stand out in the crowd.

Related articles

People Misusing Large Construction Equipment

We were tooling around online today and came across several examples of how to misuse large construction equipment. And believe us, this is some gross misuse of some very large pieces of equipment. Now, the misuse was VERY impressive, but we’re not sure we’d risk our necks (or that much money) on the type of […]

The Definitive Guide to Unit Watts Out vs Torque

The Unit Watts Out (UWO) vs torque power ratings on tools have been out for years. DeWalt is one of the most popular brands that use the UWO calculation to present the overall power of a tool. There are two unfortunate issues with this. First, people still don’t seem to understand what in the world […]

Why Use a Battery-Powered Chainsaw?

So why use a battery-powered chainsaw over gas or corded models? There are several key reasons why these unconventional OPE tools are on the rise. Chiefly, new noise ordinances are driving Pros to integrate new battery-powered blowers, trimmers, and mowers into their workflow. Other reasons include the fact that battery-driven outdoor power tools are often […]

Brand Loyalty in the Power Tool Industry

iPhone vs. Android, Apple vs. Microsoft, Ford vs. Chevy, Coke vs. Pepsi, Milwaukee vs DeWalt. These are common industry battles fought to win the minds, dollars, and loyalties of consumers. The power tool and outdoor power equipment industries uniquely differentiate their products to gain consumers’ attention. Still, brand loyalty in the power tool industry is […]

Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x