The “Just Right” Senco FinishPro 21LXP
Why chose between a brad nailer and a micro pinner? That’s the question developers asked when developing the Senco FinishPro 21LXP 21 gauge pinner. It’s the solution for situations that 18 gauge just leaves too much finish work, but 23 gauge doesn’t offer the holding power.
“The 21LXP provides the perfect balance of fastening strength while reducing finishing at a competitive price. Often, an 18-gauge brad nailer is too much for MDF and requires filling and sanding on trim,” says Senco product manager Eric Bellman. “With the ability to use headless or slight/medium head fasteners, the 21LXP offer users holding power without sacrificing finish quality.”
To improve durability, the magazine is a metal construction that automatically adjusts for fastener length. It also has a last nail auto lock out to prevent dry firing that can damage delicate parts. Exhaust is directed away from the user at the back while the swiveling 1/4″ plug helps keep the hose under control.
Senco FinishPRO 21LXP 21-Gauge 2” Pinner Specifications
- Operating Pressure: 70-120 psi (4.8 – 8.3 bar)
- Air Inlet: 1/4” NPT
- Weight: 2.7 lbs (1.2 kg)
- Height: 8.89” (226mm)
- Width: 1.85” (47mm)
- Fastener Capacity: 200
- Fastener Range: 5/8” – 2”
- Fastener Gauge: 21
- Warranty: 5 Year Limited
- MSRP: $249
For more information, visit Senco’s website or any Senco retailer.