Makita 18V Cordless Rivet Tool: Two Tools with Different Power Levels

Makita 18V Cordless Rivet Tool: Two Tools with Different Power Levels

New Makita 18V Cordless Rivet Tool Models Set Rivets Up To 1/4″

Two new Makita 18V cordless rivet tool models are coming with different power levels to match the job. Both brushless rivet tools can work with aluminum, steel, and stainless steel rivets. Since the tools hold the rivet in place, you can turn it to whatever angle you need to set it properly. An LED light on the front lights up the area when you’re working in a dark corner.


Makita puts a transparent mandrel catcher on the back end, making it easy to see how full it is at any point.

Ergonomically, Makita goes with a contoured handle, similar to their drills and impact drivers. What’s interesting is the apparent lack of overmold, perhaps to encourage you to use gloves.

The Makita XVR01 18V cordless rivet tool is the less powerful of the two. It uses a 25mm stroke with 10 kN of pull force to set rivets up to 3/16″ in one stroke for most rivets.

The Makita XVR02 rivets up to 1/4″ using 20 kN of pulling force. Its 30mm stroke sets most rivets in one stroke as well.

There’s no price information available just yet and we haven’t seen any preorder information from retailers yet. That should change as we get closer to a launch date and we’ll update this article when more information comes out.

 

Makita 18V Rivet Tool Specifications

Makita XVR01 Cordless Rivet Tool

  • Models: Makita XVR01Z (bare), Makita XVR01T (kit)
  • Power Source: Makita 18V LXT battery
  • Pull Force: 10 kN
  • Stroke Length: 25mm
  • Dimensions (with Battery): 12-3/8″ x 11-1/4″ x 3-1/8″
  • Weight (with Battery): 4.9 pounds
  • Included in Kit
    • Tool
    • 2 x 5.0Ah batteries
    • Rapid Optimum Charger
    • Molybdenum Disulfide grease
    • 3.2mm, 4.0mm, and 4.8mm nosepieces and jaw pushers
    • Case
  • Warranty: 3 years
  • Price: TBA

Makita XVR02 Cordless Rivet Tool

  • Models: Makita XVR02Z (bare), Makita XVR02T (kit)
  • Power Source: Makita 18V LXT battery
  • Pull Force: 20 kN
  • Stroke Length: 30mm
  • Dimensions (with Battery): 12-3/8″ x 11-1/4″ x 3-1/8″
  • Weight (with Battery): 5.3 pounds
  • Included in Kit
    • Tool
    • 2 x 5.0Ah batteries
    • Rapid Optimum Charger
    • Molybdenum Disulfide grease
    • 4.8mm, 6.0mm, and 6.4mm nosepieces and jaw pushers
    • Case
  • Warranty: 3 years
  • Price: TBA
Shop Amazon

Related articles