Ridgid RE6 3 in 1 Electrical Tool

Ridgid RE6 Electrical Tool

New Ridgid RE6 3 in 1 Electrical Tool Cuts, Crimps, and Punches

The new Ridgid RE6 Electrical Tool is the company’s first battery powered tool targeting professional electricians. The RE6 features Ridgid’s innovative QuickChange System. This new system utilizes a collar that allows for switching out the 3 heads designed for the Ridgid RE6. These tools include a cutting head, crimping head, and punching head. Each of the new attachments for the Ridgid RE6 are capable of 360 degree rotation.


The Ridgid RE6 has an inline design that has been optimized for one handed use. Its cutting, crimping, and punching force are produced from its 6 ton hydraulic output. LED indicators, on board diagnostics, and automatic ram retraction help to keep the RE6 performing at a high level.

The Ridgid RE6 is a 2014 Pro Tool Innovation Award Winner for the Cordless 18V Wire Cutter category. I don’t usually point out commercial ads, but they did a great job with a James Bond style introduction to the RE6.

“The RE 6 is going to be a real game changer for electrical contractors looking to save time, save space and reduce the total amount of tools they carry around,” said Christopher Burton, Global Marketing Manager at RIDGID. “Plus, daily tasks are easier than ever since the interchangeable heads don’t require cumbersome dies, inserts or adapters.”

Ridgid RE6 Attachment Heads

Ridgid RE6 Electrical Tool

SC-60C Scissor Cutter Head

There are two heads available for wire cutting duties; a copper/aluminum head and  an ASCR head. The copper/aluminum cutter will get you through up to 750 kcmil (MCM) building wire or 500 kcmil (MCM) copper flex wire.  The ASCR head is rated to a maximum of 477 kcmil (MCM) ASCR.

4P-6 4PIN Dieless Crimp Head

The 4P-6 4 PIN Dieless Crimp Head features a slim latching system to help get into those tighter work spaces. It is capable of crimping up to 750 kcmil (MCM) cable.

PH-60B Knockout Punch Head

The Punch Head allows electricians to punch up to a 3-1/2″ diameter hole using Ridgid or other manufacturers’ knockout punch dies. It is rated for use in up to 12 gauge mild steel and 14 gauge stainless steel.

For more information, check out Ridgid’s website by clicking here.

Related articles