October 25, 2021

Professional Tool Reviews for Pros

Kershaw Camber Review

Kershaw Camber
PTR Review
  • Ergonomics 9.5
  • Edge Sharpness 9.2
  • Edge Retention 9.3
  • Grip 8.5
  • Deployment 10.0
  • Value 8.0

We've long considered the Blur to be Kershaw's best EDC, but the Camber may very well take its place. S30V steel provides excellent edge retention with the ability to sharpen it to a very fine edge, but comes at a premium price. The aluminum handle with Trac Tec inserts provide a non-reflective coating for tactical or discrete carry.

Overall Score 9.0 (out of 10)

One of my favorite offerings from our friends in the great Northwest is the Kershaw Camber. Camber is a reference to a slight curve that’s found on airfoils, ships decks, and even roads. Out of the box, the Kershaw Camber appears quite modest as opposed to some of the flashier models on the market. Dig deeper into this premium knife, and you’ll see that it’s what is on the inside that makes this knife so special.

Kershaw Camber Specifications

Kershaw Camber


  • Model: 1678 Kershaw Camber
  • Knife Classification: Spring Assisted Folder
  • Blade Type: Drop Point
  • Blade Material: S30V, Stonewash Finish
  • Handle Material: Aluminum with Trac Tec Inserts
  • Locking Mechanism: Liner Lock
  • Closed Length: 4.2″
  • Blade Length: 3″
  • Clip: Reversible, Tip Up Only
  • Weight: 3.8 ounces
  • MSRP: $139.99

Starting with the name, the Kershaw Camber’s slight curve is found on the center of its handle. This allows for a more ergonomic feel when holding it. On my grip, the top of the curve rests against the fat part of my hand just below my thumb. In a typical slicing grip, the top of the arch rests against the joint beneath my middle finger rather than in the middle of my palm like my usual EDC.

Kershaw Camber

The handle is made from 6061-T6 anodized aluminum with Trac the inserts near the top and bottom on both sides. The aluminum offers an attractive tactical finish that won’t reflect light and leaves a lightweight feel to the Camber. The clip is reversible for left or right side carry, but you’re going to have to live with the tip up carry. A quick look at the inside of the handle and you’ll notice a standard liner lock. It’s nothing to write home about, save for the fact that it’s a reliable, safe way to keep the blade deployed.

One of the features that I like the most on the Kershaw Camber is the SpeedSafe spring assisted opening. It makes deployment fast and enjoyable to the point that you’ll probably find yourself mindlessly opening and closing the Camber frequently. I love that the Camber uses a forefinger flipper rather than thumb stud. While the Blur is one of Kershaw’s most beloved models, I found the thumb stud to more awkward than a forefinger flipper.

Kershaw Camber

Yes, I’ve intentionally saved the blade for last. The blade is a traditional drop point made from S30V powdered stainless steel. The drop point design of the Kershaw Camber gives it an excellent balance of slicing and piercing potential. S30V is one of the most adored steel blade materials on the market as an entry into the super steel class. “V” isn’t for Vendetta in this case – it’s for Vanadium. Vanadium improves the strength to weight ratio of steel and was even used by Henry Ford to reduce the weight of his automobiles while increasing the strength of steel components.

The powdered nature of S30V steel makes it more dense. The result is a blade that can be sharpened to an extremely fine edge while at the same time offering outstanding edge retention. Getting the best of both worlds comes at a premium price though. If we take the Kershaw Blur as an example, S30V steel adds $30 to the price.

Kershaw Camber

The only word of caution that I would offer is when it comes to resharpening the Camber. S30V takes a while to sharpen because it is so dense. Unless you’re an enthusiast that has really honed your ability to sharpen blades well, you may want to leave resharpening to a professional shop.

The relatively vanilla design Kershaw Camber might not be a winner at any beauty contests. However, when it comes to applicable function and edge retention, I’m not sure that you’ll find a much better EDC on the market. $139.99 might be a little steep if you’re just looking for a basic knife to carry around. If you’re looking for an EDC that’s of a higher quality, take a good look at the Kershaw Camber.

Sign up for our newsletter below between now and February 29, 2016 to win a Kershaw Camber!

Like Pro Tool Reviews on Facebook!

Related articles

Crescent Aviation Snips Expand HVAC Line

Upgraded Crescent Aviation Snips Give HVAC Pros More Options Crescent has upgraded the line of tradesman aviation snips with new handle colors and a black oxide coating. They claim these black oxide-coated compound Crescent aviation snips will deliver over half a million cuts. That’s enough to complete over 700 residential HVAC installs. Crescent Aviation Snips: […]

Toughbuilt Scraper Utility Knife (Retractable)

Toughbuilt Tackles Three Tasks in One Tool Toughbuilt launched a first-of-its-kind retractable utility knife. It pulls triple duty as a utility knife, scraper, and light-duty pry bar. We love to multitask and can appreciate a tool that combines a couple of key uses into one. The Toughbuilt Retractable Scraper Utility Knife makes for super simple […]

How to Use a Whetstone to Sharpen Knives

Knowing how to use a whetstone to sharpen a knife helps you get close and intimate to the work. It also often results in a better sharpening—and, frankly, it just feels more satisfying! You can sharpen your knives in any number of ways. There are electric sharpeners, filing systems, and belt systems. Many manufacturers even […]

Irwin ProFlip Folding Utility Knives

Folding Utility Knives Designed for One-Hand Use When you’ve got things to cut, but only have one free hand, well, that’s when the perks of the Irwin ProFlip Utility Knives really make a difference. With Irwin’s ProFlip mechanism, you can quickly open and close these knives with one hand. The Irwin ProFlip line includes both […]

Notify of
Inline Feedbacks
View all comments
Would love your thoughts, please comment.x