Delta 50-871 3-Speed Ambient Air Cleaner Preview
If you think a dust extraction system is all you need for a clean shop, you’re missing an important component. […]
Senco Acquires Danish-based Expandet Fasteners
Mergers and acquisitions are in the air it seems. Not too long ago we reported about Stanley Black & Decker […]
Ridgid Roofing Cutter Review R040SCA
One of the most difficult parts of doing a new roof (there are so many to choose from) is cutting away the shingles that you run over the side of the drip edge as you make your way up the roof. Typically you do this with a combination of hook or straight blades, depending upon whether you’re cutting from the front or backside of the shingles. Ridgid’s new Pneumatic Roofing Cutter sets out to provide a way to use the air line you’ve already got run to the roof and simplify a job that was previously quite tedious and which required several blade changes to accomplish.
Ridgid R040SCA Pneumatic Roofing Cutter Review
One of the most difficult parts of doing a new roof (there are so many to choose from) is cutting away the shingles that you run over the side of the drip edge as you make your way up the roof. Typically you do this with a combination of hook or straight blades, depending upon whether you’re cutting from the front or backside of the shingles. Ridgid’s new Pneumatic Roofing Cutter sets out to provide a way to use the air line you’ve already got run to the roof and simplify a job that was previously quite tedious and which required several blade changes to accomplish.
Tenryu Silencer Series Coated Wood Blades
Tenryu was on-hand at this year’s IWF and showed off their newest Silencer series of 10″ coated miter and table […]
Safety Speed 7000 Panel Saw
Safety Speed Mfg. showed off its new 7000 panel saw, designed as an affordable and accurate panel-cutting solution for home […]
Leitz Z3 Diamaster PRO and Diamaster PLUS Routers
This ventures into the world of higher-end tools, but the new Leitz Z3 Diamaster PRO and Diamaster PLUS router cutters […]
Hera Lighting EQ-LED and ER-LED Flat 24V Lights
Hera Lighting is at the 2012 IWF (International Woodworking Fair) and released a couple new LED lights that we found […]
Black & Decker MATRIX Quick Connect System Preview
In an effort to make their tools more adaptable to the different needs of consumers, Black & Decker launched its new MATRIX Quick Connect System tool. While this isn’t something we think we’ll be seeing on the jobsite anytime soon, it’s good to pay attention since Black & Decker, Porter-Cable and DeWalt are so closely interconnected through Stanley Black & Decker. So what is the MATRIX? (sorry, I couldn’t resist) It’s a new type of modular tool system that goes even farther than similar systems like Festool’s TI system with its FastFix Interchangeable Chucks.
Are Li-ion Batteries HazMat Material?
Are Li-ion batteries HazMat material? In some cases, yes. On May 16, the postal service stopped shipping iPads, Kindles, laptops, and other […]