Tool Reviews & Buying Guides by Trade Archives

January 25, 2012 0

Porter-Cable PCC581B 18V Infrared Thermometer Review

Getting a quick and accurate bead on the temperature differential around an AC duct or a door can be a lifesaver for air mechanical technicians and energy efficiency specialists. While there are a lot of tools on the market that can help you do this, it’s nice to be able to reach for a familiar name – particularly when your shop is already equipped with compatible batteries and chargers. Recently Porter-Cable launched the PCC581B Infrared Thermometer, which comes as a bare tool, making it a great choice if you’re already vested in their 18V cordless platform. And if you’re not, Porter Cable also offers a 9V-powered version, the PCC582B. Both of these infrared thermometers incorporate a tri-color beam that indicates temperature changes visually along with the digital readout. When you pull the trigger, the thermometer takes a reference temperature reading while it projects a circular green beam onto the surface at which it is aimed. The projected beam colors change when a difference in temperature is detected as you scan it across an area. A blue beam identifies a cooler spot, and a red beam indicates a hotter area.

January 25, 2012 0

Kershaw Clash 1605X Folding Knife Review

by Clint DeBoer

The Kershaw Clash 1605X folding knife is possibly one of the more attractive assisted-open folding knives we’ve seen in a while. […]

January 12, 2012 0

SENCO FN55AX Fusion F-18 Cordless 18 gauge Brad Nailer

by Thomas Gaige

With the rise of cordless finish nailers, Senco takes a different approach by using a sealed nitrogen cylinder and a lithium-ion battery to keep them powered. Recently we had the chance to try out the FN55AX Fusion F-18 Cordless 18-Gauge Brad Nailer. We found that this nailer packs in a pile of useful features, has plenty of power, and will keep up with pneumatic nailers. More and more we are turning to brad nails for our finishing projects because of their great holding power combined with the very small head size. A smaller head size means less patching and putty when you are done. There is a lot to like with this nailer and it comes in near the top of our list of must-have tools.

January 12, 2012 0

Hart 21 oz Milled Face Hickory Framing Hammer Review

by Clint DeBoer

For some, a hammer isn’t all that important. If you’re serious about tools, however, or a framer by trade, a hammer is an extension of your arm and something you use almost all the time. With that being the case, issues like weight, features, and balance become very important. In fact, when you’re striking nails almost non-stop, it’s possible to actually calculate the time-is-money factor, and you’ll see that your choice of hammer becomes something that could net you literally hours of labor-savings over the course of a year. It was with that mentality that we turned our fascination to Hart’s line of Mill-faced Framing Hammers.

January 12, 2012 0

Hart 21 oz Milled Face Steel Framing Hammer Review

by Clint DeBoer

January 7, 2012 0

Masterforce 18V Cordless Band Saw 241-0440 Review

by Ben Parker

The Masterforce 18V cordless band saw was something that intrigued me. It looked light and portable and it was based on a decent platform that I was familiar with, so I knew there were batteries, chargers, and other tools that could work off the same system. That alone made it expandable and attractive and, besides that, I had been looking forward to trying out a cordless version of this type of tool for quite a while now. Not many DIY-types will have much use for a cordless band saw, but if you are an electrician or a plumber, it will almost undoubtedly be one of the greatest power tools in your bag. I happen to work for a local electrical company and so the ideas that were running through my head while pondering the use of this type of tool in my daily job, were beginning to overwhelm me. This was going to be a review I could really dive into.

January 4, 2012 0

Metabo STA 18 LTX 18V Cordless Jig Saw Preview

by Clint DeBoer

Metabo Corporation is a company we’re at least familiar with, though we haven’t done too much hands-on with their tools to-date (something we hope to remedy soon). The German company has been around for decades and specializes in pro-grade electric and cordless power tools and abrasives for the industrial, construction and welding industries. This week, Metabo introduced the 18V STA 18 LTX Cordless Jig Saw which is part of the company’s PowerMaster Series of 18V lithium-ion cordless power tools. Metabo is focusing on power and run-time, stating that the new saw can cut more than 98 feet of chipboard with a single battery pack charge. The tool seems ideal for all the expected roles of a jig saw, like HVAC duct cutting, cabinet making and fitting, and just about any plywood application you can think of.