fbpx
July 23, 2021

Professional Tool Reviews for Pros


Understanding the OSHA PEL Permissible Exposure Limits and Silica Dust

Husqvarna K 760 Power Cutter

I love the team over at IQ Power Tools for several reasons. First, their dry cut tile saw revolutionizes tile cutting. You should check it out if you haven’t seen one in action. Second, they seem to love numbers just as much as I do. Data-driven geeks of the world, unite! In an article discussing a better understanding of silica dust and Table 1 regulations, they break down the OSHA PEL (Permissible Exposure Limits). More specifically, they talk about exactly how much is 50-micrograms of silica dust. They show how much dust you can potentially breathe in by making just one cut in a 60 mm (2.36″) paver.


Just the Facts

  • Data comes from cutting a 2.36″ x 4″ paver
  • The cut removes 1.18 in³ of material, equalling 45 grams
  • Silica makes up roughly 20% of masonry materials
  • 20% of 45 grams is 9 grams, or 9,000,000 micrograms, of silica dust

The blog post breaks down the math in much greater detail, so check that out if you want more proof. They use a 2.36″ x 4″ paver for their example and show how one cut removes 1.18 in³ (cubic inches) of material using a 0.125″ kerf blade.


Based on the weight of the paver, you get 45 grams of removed material.

Since silica makes up roughly 20% of masonry materials, that leaves you with 9 grams of silica in your 45 grams of waste product. Now we have to get scientific and convert grams to micrograms. 1 gram = 1,000,000 micrograms, so our cut produces 9,000,000 micrograms of silica dust.

Top 10 OSHA Violations PEL

Also, remember that OSHA standard?

It’s just 50 micrograms per m³ (cubic meter) of air.

The average Pro can inhale up to 840 micrograms of silica dust in an 8-hour day. That one paver cut produces enough silica dust for 10,714 days at the PEL (Permissible Exposure Limits). That’s more than 34 years’ worth of 6-day weeks and no vacations. Our original question was how much is 50-micrograms of silica dust. After this, we realize just how important the PEL is to worker safety.

The Takeaway

While many companies are motivated by avoiding fines for silica dust violations, individuals need to understand the risks of silicosis. Pros with power cutters put themselves at risk when they dry-cut everything in sight with no PPE or dust collection. They might be headed for an unpleasant and possibly early retirement.

OSHA sets the PEL very low. However, their goal is to get Pros into compliance for better long-term health.

IQ Power Tool Dry Cut Tile Saw Review

Related articles

Should I Buy a Drill or an Impact Driver?

Several of our readers have posed this common question to our staff: “Should I buy a drill or an impact driver?” That’s a great question and one that comes up pretty early in the apprenticeship training process. Here’s the short answer: If you can only afford one tool, buy a drill. However, get a 2-tool […]

How to Use a Reciprocating Saw Like a Pro

There’s probably no more useful saw for remodelers, plumbers, electricians, and homeowners than the reciprocating saw. It’s hard to imagine a jobsite without one. But that was the reality before the introduction of the Milwaukee SawZall—the trademarked name that became synonymous with reciprocating saws—in 1951. You might have already read our best corded reciprocating saw article. Regardless of […]

What is a GFCI Outlet and Where Do They Go?

Part of what Pros run into involves answering questions for homeowners. Here’s a question that comes up quite a bit: What is a GFCI outlet and where do they go? (or why do we need them?) We grabbed a couple of our resident Pros to help answer this question. We also dive into why you need […]

How to Use a Tap and Die to Create or Repair Threads

When using a tap and die set, it’s important to understand the terms. “Tapping” occurs when you cut, or recut threads into a hole or nut. Most auto mechanics and metalworkers have likely dealt with this issue. It may have occurred in the form of a stripped socket or cut-off bolt which needed re-threading. Learning how to use a tap […]

Subscribe
Notify of
guest
2 Comments
Newest
Oldest Most Voted
Inline Feedbacks
View all comments
Ryan

Did you account for the material that does not go airborne during the cut? Not saying it’s o.k., by any means. Just want to be as accurate as possible, being a construction worker myself and sometimes doing this kind of work.

2
0
Would love your thoughts, please comment.x
()
x