fbpx
October 20, 2021

Professional Tool Reviews for Pros


Jet 14 Inch Bandsaw (714550) Preview

Jet 14 Inch Bandsaw

Jet 14 Inch Bandsaw Now Powered By 3 HP Motor

Jet’s 14 inch Bandsaw (model 714550) is the latest edition to their bandsaw lineup and features the power of a 3 horsepower motor. Our experience with Jet bandsaws has been very positive and they usually rate very high in build quality. You can check out our review of the Jet JWBS-14SF 1-3/4 horsepower bandsaw. The 714550 features an actual cutting length of 13-1/2 inches. That 3 horsepower motor delivers 3000 SFPM just like the 1-3/4 hp model. The additional power goes into maintaining that level of speed when smaller motors begin to bog down. The larger motor also requires 240 volts of power so you’ll need to make sure that you have a connection available to handle that.


Jet 14-inch Bandsaw Features

When it comes to features, this Jet 14-inch bandsaw has plenty to make getting the job done less stressful. The cast iron table measures 21-1/2 inches long by 16 inches wide and stands 39 inches from the floor. It is capable of tilting up to 45 degrees to the right and 10 degrees to the left. There are a pair of 4-inch dust collection ports on the back of the saw. Jet recommends that your dust collection system is capable of 400 CFM to use them effectively.

The fence has been redesigned to help you be more precise than previous versions. It measures 18-1/4 inches long and 6 inches high. Sliding on a steel guide rail, it is fully adjustable in two positions and features micro-adjusting with a laser-etched scale.

On the inside, the 125-inch blade sits on a set of cast iron, nine-spoke upper and lower blade wheels. These have been computer-balanced to reduce vibration and increase accuracy. The jet 14-inch bandsaw also handles precise tension adjustments using a and handwheel and tensioning scale. Blade changes are tool-free thanks to a blade tension release.

Jet backs up the 3 HP 14-inch bandsaw with a 5-year warranty and their RED Assurance service and support program. MSRP is $1799.99, and you can find authorized dealers on their website.


Jet 14 Inch Bandsaw Specs

  • Model: 714550
  • Power Source: 240V single phase 3 HP motor
  • Blade: 125 x 1/8 – 3/4 in. (1/2 in. blade included)
  • Blade Speed: 3000 SFPM
  • Cutting Capacity: 13-1/2″
  • Weight: 360 pounds
  • Warranty: 5 years
  • MSRP: $1799.99

For more information, take a look around Jet’s website by clicking here.

Related articles

Stopping a Saw Blade with Your Finger Video!

If you thought putting your hand into a live, spinning table saw blade was hard to do—imagine doing it TWICE! This time, Kenny Koehler puts his index finger in the path of the Bosch Reaxx table saw blade. He does it to see how it fares with a front-of-blade contact. And let me tell you, putting […]

The Best Tool for Cutting a Ceramic Tile Backsplash

Adding a tile backsplash is a great way to dress up a kitchen. Often when doing a simple tile backsplash, some cuts are needed to get the tile around switches and receptacles. There are a few options and methods for doing these small cuts that don’t necessarily involve expensive or fancy equipment. Chances are you […]

How to Cut Corbels on a Band Saw

Often it’s the attention to small details that makes fine craftsmanship stand out. If you want to build a utilitarian table, bench, or shelf, there are plenty of ways to do it without going to the trouble of making it pleasing to the eye. But sometimes we’d like to build something that will be at […]

How to Calibrate a Table Saw Like a Pro

In our article what to look for on a table saw, we told you that the table saw is the cornerstone tool of both the jobsite and shop. It makes the big cuts that are either difficult or near-impossible with other tools. It also does this while offering tabletop support and built-in guides to keep material straight. Still, if you don’t know how […]

Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
0
Would love your thoughts, please comment.x
()
x