October 22, 2021

Professional Tool Reviews for Pros

What Dust Extractor Bag Do I Need? A Pro’s Guide

So you decided on a portable dust extractor but now comes the question of what bag, if any, you should use. If you’re still looking for a good model, take a look at our OSHA-compliant dust extractor shootout to sort it out! But back to the subject at hand: What dust extractor bag do I need?

Like most questions in the tool industry, it depends. So let’s take a look at your major options.

What Dust Extractor Bag Do I Need for Wet Vacuuming?

No Bag at All

The purpose of using a dust extractor bag is to contain the mess, but doesn’t the canister already do that?

Absolutely! When you’re doing any wet vacuuming, you’ll want to go without a bag. Some people will go bagless for general cleanup as well, simply emptying the canister when it gets full. That’ll work, but it’s not optimal. And if you’re working with concrete dust, you’re out of compliance without the bag.

Pro Tip: Go bagless if you’re vacuuming liquids or slurry. 

What We Recommend for Larger Debris

Plastic Dust Extractor Bag

What Dust Extractor Bag Do I Need?

Plastic dust extractor bags are the least expensive and do a good job of containing the mess. But there are a few tradeoffs. The bag sits open, so dust reaches the filter and can clog it up. Many Pro-level dust extractors include an automatic filter cleaning system, and that certainly helps.

Best OSHA-Compliant Dust Extractor Shootout

Since air doesn’t pass through plastic, there are vent holes in plastic bags. Those holes can allow dust to escape into the canister. If you’re working with a material that needs to be completely contained, like lead paint or concrete dust, it can pose a problem. The other issue is that since the bag sits open in the canister, dust can escape when you take the top off to remove the bag.

Plastic bags do their best work when you’re collecting material like wood shavings and concrete chips that gravity pulls to the bottom and tend to stay there. They’re more tear-resistant than paper or fleece bags.

Pro Tip: Use a plastic dust extractor bag for larger dry debris cleanup rather than fine dust particles. 

What Concrete Bag is Needed for Concrete Dust?

Fleece Dust Extractor Bag

What Dust Extractor Bag Do I Need?

Fleece dust extractor bags allow air to pass through just like a filter. In fact, these bags act as a pre-filter and are very helpful for several reasons. The only large opening is for the hose connection and the rest of the bag remains completely contained. When you remove the bag, you just close up the hose opening and call it a day.

Since the bag isn’t open in the canister like a plastic bag, most of the debris you collect never reaches the main filter. This extends your filter life and gives you more consistent performance. When using a dust extractor without an auto-clean system, a fleece bag definitely helps deliver better results.

The downside is that you’ll pay more for fleece bags and they’re easier to puncture than plastic.

Pro Tip: Use a fleece dust extractor bag for dry fine particle collection and for all applications if you don’t have auto filter cleaning. 

Best Bag for Sawdust in a Dust Extractor or Shop Vac

Paper Dust Extractor Bag

Paper dust extractor bags share similar benefits to the fleece filter. They contain debris better than plastic bags and act as a pre-filter to extend filter life. They’re also less expensive to use than fleece. But they’re paper, so they’re the easiest to tear and puncture. Paper is another option if your extractor doesn’t have auto filter cleaning.

Pro Tip: Use a paper bag for dry small particle collection when you’re confident the debris you’re collecting won’t puncture the paper. 

A Note About OSHA Compliance

Curiously, OSHA doesn’t seem to give any direction about what bag(s) you need to use to remain Table 1 compliant. While that means plastic bags are in play, we recommend avoiding them for concrete dust collection. As soon as you open the top, plenty of visible concrete dust escapes and can take you from compliant to out of compliance quickly. Fleece is really the best bet for concrete.

Related articles

Why Use a Battery-Powered Chainsaw?

So why use a battery-powered chainsaw over gas or corded models? There are several key reasons why these unconventional OPE tools are on the rise. Chiefly, new noise ordinances are driving Pros to integrate new battery-powered blowers, trimmers, and mowers into their workflow. Other reasons include the fact that battery-driven outdoor power tools are often […]

Best Cordless Impact Driver Reviews 2021

We’ve tested dozens of the impact drivers currently available to find out who makes the best impact driver in multiple classes. There are some impressive new players entering the scene that look to challenge the traditional powerhouses. When it was all said and done, the biggest names still stepped up to the plate. Our impact driver reviews […]

Brand Loyalty in the Power Tool Industry

iPhone vs. Android, Apple vs. Microsoft, Ford vs. Chevy, Coke vs. Pepsi, Milwaukee vs DeWalt. These are common industry battles fought to win the minds, dollars, and loyalties of consumers. The power tool and outdoor power equipment industries uniquely differentiate their products to gain consumers’ attention. Still, brand loyalty in the power tool industry is […]

OSHA Respirable Crystalline Silica Standard for Construction [UPDATED]

Think you know everything about the OSHA silica dust standards and rules? Dust collection and mitigation have been a big topic overseas and domestically for years. The OSHA Respirable Crystalline Silica Standard protects workers from exposure to crystalline silica. The rule deals with construction environments as well as general industry and maritime. This lets employers address the issues and provide solutions […]

Notify of
Oldest Most Voted
Inline Feedbacks
View all comments
Jonathan R Strong

Adding a cyclonic dust pre-separator in line with the dust collector can also help tremendously. I put together a simple system for occasional use with a miter saw in my basement shop, combining an Oneida Dust Deputy with nested dust collection buckets, followed by a shop vac with filter. The dust deputy is far more effective than I would ever had imagined, and draws the vast majority of the dust in so it can drop into the nested dust buckets below — almost none of the dust reaches the filter, hence the air flow remains strong and the filter lasts… Read more »


Most all new vacs have bypass air circulation to protect the motor from overheating when the filters clog. Loss of suction and lift is such a common problem when collecting fine dusts (sanding and grinding ops, anyone?) that many of the newer high end vacs have some kind of filter rejuvenation scheme built in. The number one way to keep your filter from clogging is to run the vac WITH A BAG! It’s not just for ease of disposal but it keeps the fines from clogging your expensive filter media that protects the motor from overheating. If that filter is… Read more »

Would love your thoughts, please comment.x