Milwaukee puts out a ton of new products every year, often numbering over a hundred. We’re fortunate to get our hands on a number of these tools throughout the year so we can share our experience with you. Now, I’m highlighting a few of our favorites from 2025, everything ranging from OPE to power tools, all released this year!
Be sure to check out out Best New Milwaukee Tools Page to stay up to date on the latest tools!
M18 Fuel Gen II Surge Hydraulic Impact Driver
Why We Like It
Kicking things off, we have the Milwaukee Surge Hydraulic Impact Driver. A second-generation tool that boast an impressive 1000 in-lbs of torque with a top speed of 3200 RPMs, and impacting at 6300 IPM. This marks a significant leap forward for this class of impact driver in terms of actual driving power.
Another key factor is the noise level. The Gen II Surge peaked at 90 dBA during our testing, making it 50% quieter than its counterpart, the M18 Fuel 2953, which topped out at 94 dBA during the same test. Additionally, the tone is significantly less shrill and more subdued than that of a standard impact driver. This makes it much more enjoyable to use indoors and in other confined spaces.
While it’s still not quite as powerful as Milwaukee’s flagship impact driver (2953), this is a very capable jobsite companion that can handle most common screwdriving tasks you’re likely to encounter.
Price: $199 (bare tool), $349 (kit)
M18 HotShot Jump Starter
Why We Like It
Over the years, we’ve tested dozens (literally) of jump starters. Most were smaller lithium-ion battery packs, but these are no match for larger engines or batteries with critically low voltage. That’s where the Milwaukee M18 HotShot Jump Start comes into play.
This portable jump starter provides up to 2,000 peak amps to start a car, truck, or boat with ease. It’s rated for gas engines up to 8.1L and diesel engines up to 3.0L. With the kitted 8.0Ah Forge battery, Milwaukee tells us you can expect over 70 uses on a single charge.
During our testing, we even managed to revive a seldom used F-250 work truck with a 5.4L engine. At the start, the battery read approximately 7 amps, but started right up immediately after one jump start cycle. Now that’s power on demand!
The HotShot Jump Starter poses a significant advantage over the rechargeable lead-acid jump starters of yesteryear. It’s lightweight, easy to use, and it’s compatible with all Milwaukee M18 batteries, so it’s ready at a moment’s notice should the need arise. For that, we give the HotShot Jump Starter two thumbs up.
Price: $299 (bare tool), $578 (kit)
M18 Gen II Switch Tank Backpack Sprayer
Why We Like It
The M18 Switch Tank Backpack Sprayer is another second-generation offering from Milwaukee that absolutely takes things to the next level. The 3019 delivers longer runtime, increased flow rate, and upgraded connection points that make swapping tanks a much smoother process.
Moreover, the Switch Tank design allows you to seamlessly switch between chemicals without needing to flush the tank and lines between uses. Plus, it’s compatible with all Milwaukee M18 batteries, adding an extra layer of convenience should you need a little more runtime for bigger jobs.
There’s no denying that this sprayer is geared towards the Pro market, but I also believe it’s a great option if you take a hands-on approach to your lawn and pest care. If you’re on the hunt for a reliable battery-powered backpack sprayer, the Milwaukee M18 3019 is a pretty safe bet.
Price: $399 (bare tool), $499 (kit)
M18 Fuel Dual Battery 20-Inch Chainsaw
Why We Like It
We’ve seen a ton of advancements in the world of battery-powered chainsaws over the last few years, but Milwaukee is upping the ante. The Milwaukee M18 Fuel Dual Battery 20-Inch Chainsaw makes some truly mind-blowing claims, so it definitely got our attention!
This saw is powered by a brushless motor that churns out 70cc gas equivalent power with a top chain speed of 14.3 m/s. That puts it in league with top performing commercial models like Stihl’s MS 462 C-M and the Greenworks Commercial H.O.G.!
While this saw is on the heavier side, it produces immense cutting power and features design elements that are familiar to the Pro market, making the transition virtually seamless. If you’ve been on the fence about the capabilities of battery-powered equipment, you owe it to yourself to give this one a shot!
Price: $899 (kit)
M18 Brushless Precision Blower
Why We Like It
In a busy shop, like ours, cleaning is a big part of the job, and Milwaukee aims to make that task a little easier. The Milwaukee M18 Precision Blower strikes the perfect balance of blowing force and a design that aims to please. It sports brushless motor and inline impeller that produce up to 39 CFM with a top air speed of 570 MPH, surpassing Makita’s GSA01 by a fair margin.
Milwaukee pairs this blower with three twist-to-lock nozzles that make it easy to clean tools and equipment, detail vehicles, and even blow up an air mattress. The 0887 delivers up to 30 minutes of continuous runtime with a 5.0Ah battery.
The thing to remember about a tool like this is that it’s designed for close-quarters cleaning applications rather than broad sweeping passes, like a leaf blower. The precision nozzles allow you to direct the airflow right where you need it most, and the impressive airspeed is perfect for blowing away stubborn dust and debris. It’s also a great alternative to dragging out the air hose for small-scale cleaning tasks.
Price: $179 (bare tool)
M18 Fuel Rear Handle Circular Saw
Why We Like It
Rounding out the group, we have another second-generation tool—the Milwaukee M18 Fuel Rear Handle Circular Saw. This saw tops out at 6,000 RPMs with a max cut depth of 2 5/8 inches; a slight improvement over the previous mode (2830), that peaked at 5,800 RPMs and a max depth of 2 1/2 inches.
The real improvement here is the actual cutting power. During out testing, the 2930 sailed through triple stacked 3/4-inch OSB without issue. While its predecessor (2830) was able to complete the same task, it was clear that the motor had to work a little harder to get the job done.
On top of the performance gains, Milwaukee managed to shave off some weight and improved the overall ergonomics. For Pros who need reliability and efficiency on the jobsite, this saw is a strong contender—and a clear step forward from the previous model.
Price: $299 (bare tool), $499 (kit)
