DAP DynaGrip Advanced Subfloor Adhesive Video Review

DAP DynaGrip advanced subfloor adhesive

DAP DynaGrip Advanced Subfloor Adhesive makes some pretty bold claims – particularly the ability to work on wet, frozen, and treated lumber. When DAP told us their new DynaGrip Advanced Subfloor Adhesive could be applied at near-freezing temperatures, we decided to have a go at it.


I needed to work on some subfloor repair following the discovery of an electrical installation that isn’t up to code (read: bonehead move by the installer).  After giving a couple tubes a night in the freezer, I brought the DAP DynaGrip Advanced Subfloor Adhesive up to finish the work. I live in Central Florida and while some of you still remember the last snow, it’s been in the mid-90’s for a couple weeks here. So the only way to test the freezing claim is to artificially create the condition.

As it turns out, even freezing the tubes didn’t stop the adhesive from flowing. It really is easy to gun in cold temperatures. Not only did it flow smoothly from the tube – it got rid of any hint of squeaks from this section of 3/4-inch plywood flooring.

Check out an overview of the entire DAP DynaGrip lineup!

DAP DynaGrip Advanced Subfloor Adhesive Key Features

  • High-strength, weatherproof bond prevents floor squeaks and improves structural performance of subfloor assembly
  • Bonds wet, frozen, and treated lumber
  • Excellent adhesion stands up to extreme weather conditions
  • Easy to gun, even in cold temperatures

DAP DynaGrip Advanced Subfloor Adhesive Specifications

Recommended Use

  • Subfloor
  • wood to wood connections
  • glued floor systems
  • deck installation

Not Recommended For

  • plastic
  • foamboard
  • mirror installation
  • constant water exposure
  • non-porous materials
  • applications other than subfloor and deck installation

Adheres To

  • Plywood
  • OSB
  • Enhanced OSB
  • Metal
  • Masonry
  • Concrete
  • Wood
  • Treated Lumber
  • Dimensional Lumber

Other Specs

  • Application Temperature: 0 – 120 degrees Fahrenheit
  • Service Temperature: -20 to 140 degrees Fahrenheit
  • Shelf Life: 18 months
  • Skin Time: 15 minutes
  • Cure Time: 7 days
  • Certification: Meets or exceeds ASTM D3498, AFG-01
  • Tested in Accordance with: PFS certification
  • 10.3-Ounce Coverage: 1/4″ bead – 32 linear feet, 3/8″ bead – 14 linear feet
  • 28-Ounce Coverage: 1/4″ bead – 86 linear feet, 3/8″ bead – 38 linear feet

Learn more here!

Related articles