Pro Tip: Improve Your Drywall Inside Corners News & Opinion

Improving Your Inside Drywall Corners


Drywall finishing is an underappreciated art. Like so many other grand ironies in life, the perfect job will go unnoticed. However, people will pay a lot of attention to a poorly done job. Pops, over-sanding, messy outlet hole cuts, and bubbled seams all stick out like sore thumbs. Even if you’ve mastered the finer parts of drywall finishing, inside corners can still be a challenge. If your tape rips or you haven’t feathered your mud properly, your wall will look uneven (because it is!). Conversely, sharp inside corners make you wonder if the finisher knows some sort of voodoo. It takes a lot of practice to get it right the first time. But our Pros have some tips for improving your inside drywall corners, and we’re here to share.

SUPPORT OUR ADVERTISERS

Pointers For Improving Your Inside Drywall Corners

Muddy Buddy

Improving Your inside Drywall Corners“I’d rather use too much than not enough” is a sentiment that might apply to most areas of existence, but inside drywall corners are a different matter. Obviously, you’ll want to use enough mud to cover the seam and get the drywall tape to stick, but don’t slop it on. Too much mud gets in the way of achieving sharp corners. The goal of drywall finishing is to hide the seams and create clean, sharp corners. So, err on the side of using less mud. Plus, extra mud just makes the job harder, as you’ll wind up having to sand it off later.

Also, consider using a thinner mud. Novices that have trouble with sharp corners often find that thinner mud is the answer, especially for the final or skim coat. Remember, the goal is simply to conceal the seams and adhere the tape. You’re not building a mud hut here. Cut the mud with some water for the desired thinner consistency.

One Side At A Time

Consider ditching the corner trowel for a straight putty knife, and then feathering one side at a time. There’s no shortage of ridicule for the corner trowel in professional circles. Of course, if a finisher gets the job done efficiently with a corner knife, then that’s the right way to do it. But many Pros think the job is done best with a straight knife on one side.

Bring In The Big Guns

Automatic taping tools can apply tape and the appropriate amount of mud simultaneously. Then, a corner roller is used to make a sharp corner before a mud flusher feathers the edges. Of course, the tools are more expensive than traditional drywall hand tools. But if you’ve ever seen an experienced crew use them, you’ll likely want to become part of an experienced crew. It makes the job much quicker.

SUPPORT OUR ADVERTISERS

Final Thoughts

As with most jobs, there are several opinions about how to go about it. There are likely many professionals who do great work with corner trowels, as well as being really generous with the joint mud. In the end, practice makes perfect. But, if you’re struggling in this area right now, consider these tips for improving your inside drywall corners.

If you’re a Pro and you have drywall finishing tips, add them in the comments below.

 

 

 

Leave a Reply

2 Comments on "Improving Your Inside Drywall Corners"

avatar
  Subscribe  
newest oldest most voted
Notify of
Brian Taylor
Guest

It’s not hard,it’s the inability of many not being able to think that makes it hard.

Brain Blurb
Guest
Also consider different types of mud for joint tape and finish. I have seen all too many times, some people use basic joint compound for all layers and the joint finish shrinks too much and cracks. Some DIY don’t understand that there is a better grade of topping compound that finishes slick and shrinks much less. I also like to use a 6” straight knife and knock off the corners of the knife edge to prevent slicing the tape. I still have my fathers 40 year old tape knife that is perfectly worn from years of use.