Professional Tool Reviews for Pros


Milwaukee Tape Measure Review: 48-22-7125

Milwaukee Tape Measure
PTR Review
  • Build Quality 10.0
  • Ergonomics 10.0
  • Standout 7.5
  • Visibility 8.0
  • Accuracy 10.0
  • Value 7.3

The Milwaukee Tape Measure falls on the pricier end of the spectrum at around $24.99, though it does come with a rich feature set, smooth action, near-unbreakability, and an accurate tape.

Overall Score 8.8 (out of 10)

We recently took the opportunity to test out some of the newest pro-grade model tape measures from 9 different manufacturers. Our shootout pit these comparable 25′ models up against each other in order that we might find the best tape measures for your money. We tested accuracy, durability, visibility, design, standout and throw, ergonomics, and value. Most individual tape measure models have at least a few points where they stand out, and few more so than the newest 25′ Milwaukee tape measure.


Visibility

There’s not a whole lot that’s groundbreaking in the visibility category for this Milwaukee tape measure. It has standard black marking on yellow tape that offers high contrast. In some cases, standard is good enough, but you’d rather have more. On tape measures, the contrast on this style really is suitable for any level of Pro.

There are a couple other concepts running around. Bolder lines on every 1/8″ mark is one idea that we see helps. Another is Lufkin’s Black Widow that pairs green markings on a black blade that makes the measurements really pop.


Accuracy

Let’s start with this tape’s measurement accuracy. You can have the fanciest tape measure ever, but if its measurements fall 1/16″ (or more) off the mark, you might as well dump it into the trash. At that point, you basically have a fancy paperweight.

Milwaukee Tape Measure

 

Well, this isn’t the case with the Milwaukee tape measure. We measured the accuracy of our tape measures with the Lixer Master (Model # LM002), a tape measure calibration tool that has a gauge block accuracy of +/-.0005″. Like almost all of the other tapes we measured, the Milwaukee model’s markings are dead on.

Milwaukee Tape Measure

Durability

We tested all of our tapes’ durability with some drop testing… sweet, destructive drop testing. Perhaps I missed my calling in life and should’ve gone into demo work because it was a lot of fun trying to break these tapes. But, I digress.

We took our tapes to the top of a 10′ Werner Podium Ladder, where we then dropped each tape measure onto a cement floor. Each tape was dropped onto each side of its housing until either the tape broke or we got tired of running up the ladder, at which point, we ended the testing. Incidentally, it took us 5 rounds of 1 drop on each of the 6 sides for a total of 30 drops to tire ourselves out and most of the competition was out.

Milwaukee Tape Measure
Milwaukee tape measure, post drop testing.

The Milwaukee tape measure took the beating we gave it in stride. Toward the end of our testing, we noticed some splitting in the housing, a cracked tether point, a bent hook, and a jankety clip. However, from a functional standpoint, the blade still pulled out and retracted flawlessly. Even after 30 drops from a ten-foot ladder, Milwaukee had the smoothest action of all the tapes in our test.

Standout & Throw

Some people like to ease their tape blade out, others like to throw it in one shot. Either way, 96″ (8′) is our low-end benchmark to cover sheet goods. Anything over that is a bonus as you work on longer materials. Milwaukee moves out to a respectable 105″ (8′, 9″) in our testing moving into the bottom half of our shootout participants.

For throw, Milwaukee climbs much higher into 2nd place behind Klein, recording 123″ (10′, 3″) and making Clint’s Kung Fu Tape Measure B-Movie a little closer to reality than most of us are comfortable with.

Design & Feature Set

One of the areas where the Milwaukee stands out comes down to the design and feature set. Starting with the hook design, Milwaukee uses a broad hook with a rare earth magnet in the tip. The hook grips an edge easily from all sides, and magnetic tip means that you can butt it up against any ferromagnetic material and have it hold its position.

Milwaukee Tape Measure

This is also one of the tape measures that incorporates dual side blade printing. The back side of the tape lays out the measurements vertically, and it also incorporates an architectural scale for working with blueprints.Milwaukee Tape Measure

Milwaukee uses a nylon blade coating with this tape measure, which effectively reduces the amount of wear and tear on the blade. This coating also helps account for why this tape measure feels so good to use and for the sound it makes. The blade pulls out and retracts easily, and at no point does it feel flimsy. The whole process just feels silky smooth.

Milwaukee also incorporates an easy-access finger brake. The design here might not be as sophisticated as a button brake, but it is effective. It also adds something to the ergonomic “feel” of the tape measure.

Milwaukee Tape Measure

We also really appreciate the clip the Milwaukee works with. They use a wire design that clips to your belt pretty easily. The wire is stronger than it looks and long enough to hook over your belt securely.

Milwaukee Tape Measure

Value

At $24.99, the Milwaukee Tape Measure was the second-most expensive tape measure in our test. The prices ranged anywhere from about $9-$30 dollars. We did feel, however, that despite the higher cost, Milwaukee justifies this tape’s price point by making this model extremely durable and functional. There’s a clear difference in durability between the top 2 and everyone else.

Milwaukee Tape Measure

Final Thoughts

This model ties together a relatively deep feature set, durability, and a smooth action. It suffers a little bit in the value department overall, but for those of you who might not mind spending an extra $5 or $6, you’ll definitely appreciate the Milwaukee tape measure for the high bar that it sets. It won’t measure any more accurately than most of the other tapes in our shootout, but the user experience, without a doubt, is much greater and offers more functionality than most.

Click here for our Tape Measure Shootout.

Milwaukee Tape Measure Features

Milwaukee Tape Measure

  • Five-point reinforced frame provides greater durability and lifespan
  • Nylon bond blade protection helps Milwaukee 25-foot magnetic tape measure withstand wear and tear
  • Double-sided measurement printing allows for more versatility
  • Blueprint scale provides better visibility
  • Finger stop protects hands and fingers when retracting blade
  • Magnetic hook attaches firmly to ferrous metals
  • Pocket clip allows for easy attachment to clothing
  • Wire form belt clip makes carrying and access convenient
  • Limited lifetime warranty

 

Milwaukee Tape Measure Specs

  • Model Number: 48-22-7125
  • Assembled Weight: 1.17 lbs.
  • Belt Clip: Yes
  • Measuring Type: SAE
  • Magnetic: Yes
  • Tape Length: 25 ft
  • Blade Material: Steel
  • Width: 1.83″
  • Case Material: Impact Resistant Plastic
  • Manufacturer Warranty: Limited Lifetime
Shop Amazon

 

Related articles

Milwaukee M18 Fuel Cordless Wet Dry Vacuum

Milwaukee M18 Fuel Cordless Wet Dry Vacuum Introduces Versatility Like Never Before When Milwaukee invited us up to get a sneak peek of “jobsite cleanup” solutions, we were curious what they would have behind the curtain. Our wildest guesses were dead wrong, and the reality of Milwaukee M18 Fuel cordless wet dry vacuums is far […]

Best Tape Measure Reviews for 2022

Tape measures are a staple in everyone’s toolbox from the most seasoned Pro to the greenest DIYer. Ranging in length and price, most cost less than $30. But are all tape measures created equally? Of course not. We’re breaking things down into the categories our Pro team says are most important when they’re looking for […]

Milwaukee M18 Fuel Quik-Lok Attachments

Milwaukee M18 Fuel Quik-Lok Attachment Lineup Gets Deeper For 2022 Designed to be full replacements for their standalone and manual counterparts, Milwaukee Quik-Lok attachments interchangeably latch onto a single powerhead. There are three accessories coming onto the roster in 2022—a brush cutter, a rubber broom, and a bristle brush. Milwaukee designed these to help landscaping […]

Milwaukee M18 Fuel Utility Fencing Stapler 2843-22

The Milwaukee M18 Fuel Utility Fencing Stapler (model 2843-22) looks like a promising solution for both linemen and ranchers. Can it provide a more convenient cordless solution for the former and a much less manually-intensive operation for the latter? Milwaukee M18 Fuel Utility Fencing Stapler – The Big Deal The first thing we wanted to […]

Subscribe
Notify of
guest
4 Comments
Newest
Oldest Most Voted
Inline Feedbacks
View all comments
KAREN HIEBERT

I got this as a birthday present.
I was soooo happy!
But then, disappointed.
Very flimsy.

Ken Johnson

This review clearly defines the difference between “cost” and “value”, a distinction not provided by your 6 point , 0-5 star rating table. “Value” considers cost, longevity, utility, suitability and perhaps a few other points to arrive at a determination. “Cost” is what it is. Let’s see, my electrical customers are charged (hypothetically) $100/hr for labor. I expect $50/hr combined income and profit. So, I drop my tapemeasure from the ladder, bust it, have to climb down, go to the truck to get my spare (where the heck did I leave that spare, anyway?), return, climb back up and (finally)… Read more »

A W

I picked up two for $25 during home depot’s Black Friday week. I went in looking for DeWalt’s comparable deal, but the tapes they had included felt a lot less premium than this model from Milwaukee

4
0
Would love your thoughts, please comment.x
()
x