Klein Bucket Work Center: Bucket Storage for Linemen

Linemen Can Take Their Office To The Sky With Klein’s Bucket Work Center

Linemen work diligently to help restore life back to normalcy after disaster strikes, and here in Hurricane Alley, we’re incredibly grateful for that! The Klein Bucket Work Center aims to make it easier for those linemen to keep their tools and gear organized on the job. With eight products in the lineup, Klein dubs this collection the Lineman’s Office, with modules for every application. Take a look at the details of each product in the line so you know what to expect.


Klein Bucket Work Center: The Big Deal

As the unsung heroes after events like hurricanes, tornadoes, and winter storms, linemen need a centralized place on the job to store their essential tools. That’s where Klein comes in with the Bucket Work Center modules, which utilize an S-hook design to attach to the side of linemen’s buckets to consolidate their gear.

Klein Bucket Work Center Hard Tool Storage Module (BC501S)

Klein Bucket Work Center

The Hard Tool Storage Module features 18 compartments that accommodate a variety of lineman tools. Its open-faced design and flexible tool retainers make it easy to identify the right tool for the job. You can store smaller hand tools like screwdrivers in the top compartments, and larger tools in the lower compartments. Additionally, the front of the module features two Rare Earth magnetic plates to quickly hold metal tools and parts.

Additional Features

  • Material: Impact-modified nylon
  • Length: 15.2 in
  • Width: 4.6 in
  • Height: 11.2 in
  • Weight: 3.9 lbs

Price: $189

Klein Bucket Work Center Tool Apron Storage Module (BC502S)

The Tool Apron Storage Module features 12 compartments of different sizes. Linemen can store a variety of tools, from hammers to ratchets. In fact, it even has a hammer loop and a knife pouch, so you know exactly where to find your most used tools in a flash.

Additional Features

  • Material: Polyester
  • Length: 15.5 in
  • Width: 2.2 in
  • Height: 19.5 in
  • Weight: 3.31 lbs

Price: $189

Klein Bucket Work Center Socket Storage Module (BC509S)

Klein Bucket Work Center

This Klein Bucket Work Center storage module features six slots specifically for storing your commonly used impact socket sizes. It’s also compatible with Klein’s Impact Socket Set (sold separately). Its design allows the sockets to be stored in order by size, with the smallest on top and the largest on the bottom. This lets you quickly identify the right size for the application at hand.

Additional Features

  • Material: Impact-modified nylon
  • Length: 3.5 in
  • Width: 2.2 in
  • Height: 15.2 in
  • Weight: 1 lb

Price: $89.99

Klein Bucket Work Center Auger Bit Storage Module (BC507S)

The Auger Bit Module features 2 vertical auger storage slots, accommodating 12-inch, 18-inch, and 24-inch long auger bits. You can either store your 18-inch auger bit directly in the 24-inch bit holder or use the Klein Aluminum Spacer (sold separately) to store a 12-inch bit in the 18-inch bit holder.

Additional Features

  • Material: Impact-modified nylon
  • Length: 4.1 in
  • Width: 2.2 in
  • Height: 21 in
  • Weight: 1.42 lbs

Price: $79.99

Klein Bucket Work Center Magnetic Tool Storage Module (BC504S)

Klein Bucket Work Center

The Magnetic Tool Storage Module features four Rare Earth magnetic plates that have the strength to hold a variety of metal hand tools and other small parts. These open-faced magnetic plates are located on the module’s front panel to give you quick access to the tools needed for the job.

Additional Features

  • Material: Impact-modified nylon
  • Length: 3.54 in
  • Width: 1.97 in
  • Height: 8.71 in
  • Weight: 0.66 lbs

Price: $79.99

Klein Bucket Work Center Utility Bar Storage Module (BC508S)

The Utility Bar Storage module features a 10-inch long bar that allows tools to slide in and out easily for easy access. Linemen can store hammers, straps, ropes, and other long-handled tools. Two S-hooks ensure that this Klein Bucket Work Center module remains secured to the bucket during travel.

Additional Features

  • Material: Impact-modified nylon, aluminum
  • Length: 10.1 in
  • Width: 3.3 in
  • Height: 3.74 in
  • Weight: 0.73 lbs

Price: $99.99

2-Inch and 3-Inch Utility Bucket S-Hooks

S-Hooks are what tie the whole Klein Bucket Work Center together. They attach to each module and connect to utility buckets with the standard 2-inch or 3-inch bucket lip. Not to mention, they can easily slide across the bucket to customize the position of each tool module.

Additional Features

  • Material: Nylon
  • Length: 5.49 in (2-inch hook); 5.8 in (3-inch hook)
  • Width: 0.67 in
  • Height: 6.05 in (2-inch hook); 6.3 in (3-inch hook)
  • Weight: 4.4 oz (2-inch hook); 4.8 oz (3-inch hook)

Price: $9.99 (2-inch hook); $10.99 (3-inch hook)


Related articles